**Step 1: Prepare the Surface**.
1.1. Begin by ensuring the surface where the TURF LATEX Artificial Turf SBR Latex will be applied is clean and free of any debris.
1.2. Sweep or vacuum the area to remove any dirt, dust, or loose particles.
**Step 2: Apply Primer**.
2.1. Apply a suitable primer to the surface to promote adhesion of the SBR Latex.
2.2. Follow the manufacturer's guidelines for the specific primer being used.
**Step 3: Mix the SBR Latex**.
3.1. Thoroughly mix the TURF LATEX Artificial Turf SBR Latex according to the manufacturer's instructions.
3.2. Make sure the SBR Latex is well mixed to ensure proper application and bonding.
**Step 4: Apply the SBR Latex**.
4.1. Pour the mixed SBR Latex onto the prepared surface.
4.2. Use a notched trowel to spread the SBR Latex evenly over the area.
**Step 5: Install Artificial Turf**.
5.1. Carefully lay the artificial turf onto the wet SBR Latex.
5.2. Press the turf into the Latex to ensure a strong bond.
**Step 6: Allow to Dry**.
6.1. Allow the SBR Latex to dry completely before using the artificial turf.
6.2. Follow the manufacturer's recommended drying time before exposing the turf to heavy foot traffic.
**Step 7: Enjoy Your Artificial Turf**.
7.1. Once the SBR Latex is fully dry, your artificial turf is ready to be enjoyed.
7.2. Maintain the turf according to the manufacturer's guidelines to ensure its longevity and performance.
Following these steps will help you properly use TURF LATEX Artificial Turf SBR Latex and ensure a successful installation of artificial turf.
If you want to learn more, please visit our website TURF LATEX Artificial turf SBR latex, Medical Grade NBR LATEX, styrene butadiene latex emulsion.