Spacing on a deck refers to the small edge-to-edge gap between decking boards, not the ends of the boards. While this gap is fairly small, it is still a crucial component to any good deck. Without the right deck spacing, the boards may expand, cup, and buckle out of place. As a result, you may have to replace broken decking, or reinstall the boards with wider spacing to prevent further cupping and buckling, which can be time consuming and expensive. That’s why it is essential to make sure you install the decking with the correct spacing between boards the first time.
There is no reason to put a gap between the ends (also known as butt ends or butt joints) of wood deck boards. Wood, both softwood and hardwood, is dimensionally stable in length regardless of temperature, humidity or moisture content. Keep the butt ends as tight as possible when installing wood decking. This rule does NOT apply to composite or PVC boards which can have a large thermal expansion; enough to create a serious roller coaster effect down the length of the PVC or composite boards if you DON’T leave room for thermal expansion.
The most important reason to have a spacing gap is to allow the boards the room to expand and contract naturally.
Wood, by nature, expands and contracts when there are seasonal humidity changes and the wood begins to absorb or expel moisture. When you don’t take this into account and place boards too close together, they can expand which can cause them to buckle upwards off the deck, cracking boards and pushing the fasteners out of place.
In order to minimize cupping and expansion / contraction of the boards throughout the seasons, it is important to maximize air-flow underneath and around the deck boards.
Rain can prove especially detrimental to wood decking if it doesn’t have a place to drain off the deck. When there are no gaps between the boards, this moisture remains trapped which can lead to issues like rot and mold.
Another benefit to proper deck board spacing is that the spaces help make it easier to sweep away debris from the surface of the decking. While debris may not seem like a big deal, it will take away from the aesthetic of your deck. It can also add to the moisture levels and impede the deck’s drying process which, in turn, can also contribute to – you guessed it – mold and rot.
The size of the gap you leave between decking boards can vary depending on the species of wood you choose, the moisture level, and the humidity and temperature in the climate you are installing in.
In general, you should always plan for high humidity levels and anticipate that the deck boards will expand completely in wet and humid weather. However, residents of drier areas of the country, like the Southeastern U.S., should also account for drought-like conditions when installing their decking.
For the best results, consider working with an experienced professional who will know what gap size is ideal for your climate and wood type.
For kiln-dried wood with a relatively low moisture content of around 10 to 12% and a relative humidity level of about 35 to 45%, the final deck gap should be about 1/4 inch. However, if the deck installation occurs during drier weather, with lower percentages of moisture and humidity, you may need to add an additional 1/16 of an inch, to account for additional expansion.
Air-dried decking can often be installed with a gap less than 1/4 inch (6.5 mm) because the boards will likely end up shrinking in width rather than expanding. When installing new air-dried decking the proper gap ranges from 1/8 inch (3.5 mm) – 1/4 inch (6.5mm) depending on the environment. If you are installing air-dried decking during a rainy or humid season you may want to place the boards with a 1/8 inch (3.5mm) gap. This is because the boards will likely contract over time as they release moisture creating a larger gap during the drier seasons.
However, if the wood has been fully acclimated to the local climate, which can take up to 8 weeks for air dried material, it’s still best to stick with a 1/4 inch (6.5mm) gap to ensure the boards have plenty of room to expand. We recommend using a full 1/4 inch gap even with kiln dried or fully acclimated 1×4 and 5/4×4 as well as 1×6 and 5/4×6.
The ideal spacing can vary based on the season; for example, in the Pacific Northwest, the summers are dry but the winters are very wet, or in the Northeast, the summers are generally humid and subject to significant rain but the winters tend to be below freezing and, therefore, extract water from wood. If you live in a varied climate, you might look into a resilient (spring loaded) deck clip, like our ExoClip that expands and contracts with the wood, and automatically maintains an appropriate gap.
The best way to decide the appropriate spacing for your boards is to check the moisture content of the wood before installation. The amount of moisture in the wood will let you know whether the wood will expand or shrink right away.
As the humidity increases, the moisture content increases which causes the wood to expand. As the humidity decreases, the moisture content decreases which causes the wood to shrink.
Read more about the movement of wood in relation to moisture content: Wood Handbook: Wood as an Engineering Material. The relevant table is listed below.
Use a moisture meter to find out how much water is in your wood. Be sure to check multiple pieces of wood and take an average moisture count, instead of relying on just one piece of wood that could be an outlier. Calibrating your moisture meter to the particular wood species is also a critical step to ensure that the readings you get are accurate – follow the recommendations from the manufacturer.
If you have a high moisture content, leave less space between the boards as they will shrink as the moisture is released. If you have a low moisture content, leave more space to accommodate the expansion of the boards as they gain more moisture. Typical moisture contents for exterior wood products are between 10% and 14%, depending on the local climate and humidity – anything above 15% is considered high moisture content and thse boards will likely continue to shrink.
Choosing to install a real wood deck is a big investment and one that will leave you with a beautiful statement piece for your backyard. But, with what you spend on materials, you want to be sure you do it right. One critical step that can be easily overlooked is the board spacing.
Leaving a gap between boards is critical for a well-built deck that will have space to drain, dry, expand and contract without causing the wood any damage. But, you also want to be sure you leave the right size gap: Go too small, and there won’t be enough space; go too big, and the gap can become a safety hazard.
If you still aren’t sure about how big a gap to leave for your specific wood decking, then we strongly encourage you to talk to a decking professional. They will have the ability to check the moisture content of the wood, tell you the best spacing and help with installation to ensure it gets done the right way.
Article used with permission of NOVA Wood Products, LLC
We’re looking at building a table similar to this:
https://angelamariemade.com/2016/08/farmhouse-table-diy-with-removable-legs/
It uses brackets rather than joints but we need to be able to remove the legs.
We also plan to use it outdoor (SF bay area) so it will have more temperature change than it would inside as the table in the article is intended.
We’re thinking we need to leave room between the boards for movement but really don’t like that idea since it’s a table top. Any alternatives to share?
Thanks!